weird post the codes

 

I will add the codes later on.. i have to re-vag the car as i have lost the screen print with the codes on...

here a pic of the DIS, these are the lights which came on while driving when it dropped into limp mode!!

 

You're right. The Traction Control Light is connected to the MAF, and when a MAF error is detected, the car will go into limp mode. Inspect your MAF, maybe it was just an occasional error, or maybe it's on its way to seizing. Check the MAF terminals and clean them if it's needed. Also, do some vag-com readings while driving, to see what's the reported air flow.

 

Whats MAF stand for.... is it MASS AIR FLOW meter??

Thanks

 

Also how would i clearn the MAF?? please can you just expalin in a little more details,.


Many Thanks

 

MAF stands for Mass Air Flow meter, as you guessed. You can't really clean the MAF itself... what I suggested is cleaning its terminals, so that you are sure you don't have poor connection.

If this doesn't do it, then check the MAF readings and if they are low, replace the MAF.

But since you say it only happened once, and runs fine now, then probably the MAF is fine, and it was only a sudden "gremlin" as they say

 

Cheers... i have done 1300 miles since then and been ok touch wood!!

thanks for your help!!