Audi Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I tried to change brake pads in my '98 A6 2.4 FWD.. but was unsuccessful..
I removed the cylinder assembly by removing the two bolts.. but was unable to fix the new pads since i couldnt move the piston in, to get enough room for the new pads..
I believe it has to be turned clockwise to move it in.. pls correct me if im wrong... or can anyone tell me the procedure for changing??
thanks in advance...

regards
giri
 

·
Registered
Joined
·
212 Posts
Originally posted by girishraj@Aug 15 2004, 11:10 AM
I tried to change brake pads in my '98 A6 2.4 FWD.. but was unsuccessful..
I removed the cylinder assembly by removing the two bolts.. but was unable to fix the new pads since i couldnt move the piston in, to get enough room for the new pads..
I believe it has to be turned clockwise to move it in.. pls correct me if im wrong... or can anyone tell me the procedure for changing??
thanks in advance...

regards
giri
It is necessary to make turn the cylinder by pushing it.
You can use the tool Audi 3131
 
1 - 2 of 2 Posts
Top