Audi Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
hello all, as you can tell i am new..so go easy on me..

here is the problem.
i get the codes random misfire, and random misfire on cyl 3

here is what i have done.
moved the coil packs around...no change
pulled the fuel rail......all seam to be working
changed plugs.....no change
compresion cheak.......about 125 allaround

it has a rough idle and run, it looks a simple as the plug is not fireing

this happend once before, and there was moisture in the coil packs, (i hosed down the camparment...duh) when i dried them, it was gone the next morning.

i have a Tap 1 stage 2 chip, custom exaust, k&n intake(no air box)

help
elvis
 

·
Registered
Joined
·
1,725 Posts
i think you should replace your coil pack casue coil failure is a common thing with us
 

·
Premium Member
Joined
·
534 Posts
try taking out the chip and resetting the battery... then see what it reads
 

·
Premium Member
Joined
·
534 Posts
if u moved the packs around did you reset your system? or run it for a while for it to clear?
 

·
Registered
Joined
·
11 Posts
Discussion Starter #6
RESET, AND PULLED THE BATT FOR AN HOUR, STILL COMES UP ON #3

AND IT COMED ALMOST INSTANT, AT IDLE,
BUT TAKES SOME TIME AT AROUND 2000RPM, BUT STILL COMES BACK..


E
 
1 - 7 of 7 Posts
Top