My A6 3.0TDI 2005 won't start

Wednesday,09,February,2011,17:58:58:59303
VAG-COM Version: Release 704.1

Address 01: Engine
Control Module Part Number: 4F0 910 401 L
Component and/or Version: 3.0L V6TDI G200AG 0040
Software Coding: 0011772
Work Shop Code: WSC 02335
3 Faults Found:
16619 - Boost Pressure: Regulation Range not Reached
P0235 - 001 - Upper Limit Exceeded - MIL ON
Freeze Frame:
RPM: 1953 /min
Torque: 222.3 Nm
Speed: 50.4 km/h
Absolute Pres.: 1948.2 mbar
Absolute Pres.: 856.8 mbar
Mass Air / Rev.: 399.5 mg/str
Temperature: 39.6°C
Duty Cycle: 15.8 %

19804 - Control Circuit for Controller for Turbocharger 1 (J724): Electrical Malfunction
P3348 - 008 - Implausible Signal - Intermittent
Freeze Frame:
RPM: 924 /min
Torque: 35.1 Nm
Speed: 0.0 km/h
Duty Cycle: 1.0 %
Voltage: 11.86 V
Bin. Bits: 00101111
Absolute Pres.: 816.0 mbar
Absolute Pres.: 785.4 mbar

19804 - Control Circuit for Controller for Turbocharger 1 (J724): Electrical Malfunction
P3348 - 005 - No or Incorrect Basic Setting / Adaptation - Intermittent
Freeze Frame:
RPM: 924 /min
Torque: 35.1 Nm
Speed: 0.0 km/h
Duty Cycle: 1.0 %
Voltage: 11.86 V
Bin. Bits: 00101111
Absolute Pres.: 816.0 mbar
Absolute Pres.: 785.4 mbar

After fetching kids from school my wife tried to start the car and it wouldn't. The engine doesn't even turn at all. Above is the VAG-COM fault codes report I got and I cleared the faults. I tried to start it without any success. Any help will be appreciated.