Audi Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
I need to change my blower motor. I bought the motor and I need to locate where to install the new one. I heard its under the glovebox. How do I remove the glovebox, and put the new motor in.

Thanks
Ryan
 

·
Registered
Joined
·
1 Posts
hey, just doing this on my 93 90. Like you said, just pull the glove box off, there should be 4 or so screws and then you have to wiggle the glove box out. The motor is right there. There should be 3 or 4 screws that hold the housing on, and 2 screws that hold the motor to the housing. Remove all of these and you should be able to get it out. Make sure you unplug all wiring that connects to the motor as well. Hope that helps, even though your car is older and may be different. Good luck!!
 
1 - 2 of 2 Posts
Top