Audi Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have just bought the IPOD2CAR unit for my Audi A4 but it was supplied with the PXHAD1 cable for connection.

However this cable is for attachment to the 13 pin din cable for cd changers in the boot (trunk).

But I have an Audi Concert mounted in the glove box which is connected via the 8 pin iso connector form the back of the head unit.

So does anyone know where I can get the 8 pin iso to 13 pin din connector cable that is normally in other audis for the boot cd changer ??

Any help would be appreciated - even a pin out diagram would do and I could solder my own cable !!

Thanks

Adam
 

·
Registered
Joined
·
5 Posts
Discussion Starter #2
No to worry - ended up making the cable myself

Cut off the black iso connector from the cd changer and wired on the wires from the din cable after cutting the din connector off.

Bit of a nightmare but it all works !!

If anyone needs the info then let me know.

Adam
 
1 - 2 of 2 Posts
Top