Audi Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I replace the rotors and pads on an 2001 quattro and when I replaced the carrier on the rear rotors, I noticed that it is rubbing the rotor on both rear wheels. This is on both rear wheels! Could the hubs have moved out? It looks to be about 1/8" gap. I'm stuck at this point and I'm not to keen to take the hub off just to see if that is the problem with both wheels.
 

Attachments

1 - 1 of 1 Posts
Top