Audi Forums banner
1 - 7 of 7 Posts

· Registered
Joined
·
186 Posts
Depends on your driving style (aggressive), driving conditions(city/highway) and even transmission (standard/automatic).

Aggressive driving style will wear brakes faster. As will city driving (frequent stops & starts). A manual transmission can be used (gearing down) to reduce break wear since part of the breaking is done by the engine.
 

· Registered
Joined
·
144 Posts
Originally posted by Diana81@Mar 29 2005, 09:29 PM
my brake light went on right after a replaced my brakes, front n rear (rotors and pads) then it went away. it still comes back for a day or two
does anyone know why it does this?
Brake pads have a wear sensor on them. You might want to check if it's well plugged in, since the pads couldn't have worn so fast. If it's not well plugged in, the computer might think your pads have worn.

My car only has sensors on front pads, but others have on all 4 pads. Check them all out!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top