EFI kit for Audi 10v NG/KV/NF/WC etc. [Archive] - Audi Forums

: EFI kit for Audi 10v NG/KV/NF/WC etc.


JoeDalton
07-17-2011, 01:30 PM
Hello everybody

Last year i bought EFI kitfrom flow-improver.de for my Audi KV, K-jetronic engine. It was supposed to be part of a project I was working on, but because of unforseen circumstances I have to give it up. :(

The kit contains the following:

1. Bosch HFM5 Air flow meter
2. Adaptronic e420c ECU, with loom, software and manual
3. High flow fuel rail.
4. 5 Bosch low impedance injectors.
5. Adapters for injectors to fit the CIS Audi heads
6. Fuel pressure regulator
7. Audi A6 Airbox (fits directly to the Bosch Airflow meter)
8. Misc. airhoses and silicone bends
9. Water temp. sensor

More information can befound here: Audi R5 10V EFI Kit Saugmotor LMM (http://www.flow-improver.de/shopdeutsch/042c8b9b7f0931d0b/042c8b9b7f10de91d/042c8b99980d185f1/042c8b9aa70bf6507.php) and on my blog here: EFI kit with Adaptronic ECU (http://passat.stupidmonkey.dk/engine/flow-improver-efi-kit-with-ecu/)

The kit has never been used, and the selling price at the moment for a new kit like this is €1536EUR or $2000USD. So I'm counting on approx. €1000EUR or $1400USD for the entire kit including the A6 air box and shipping from Denmark. Let me know if the asking price is totally unreasonable.

I can send mere pictures and/or information if necessary. Please don't hesitate to ask! :-)

Best regards

Karsten Jakobsen

bbruno
07-25-2011, 02:01 AM
Hi Karsten,

I can be interrested by you EFI system.

Can you tell me more about it ?

I would like to replace my KE-Jetronic III by this is it the correct kit to do it.

Is the system ready to use or is some programmation need for this?

Best regards

Bruno

JoeDalton
07-25-2011, 06:33 AM
Hi Bruno

What engine are you planning to use the kit with?

I'm positive that you can use this kit for replacing the KE-Jetronic III. You will have to think about connecting your Bosch lambda sensor and knocking sensor, but this should be very easy. The Bosch lambda is a plug and play installation on the ECU. I have attahced the manual for the ECU. You can also find more information the company website Adaptronic - Energise Your Engine! (http://adaptronic.com.au/) the new model is called e420d but is essentially the same. Try looking thorugh the Apatronic forums

Yes there will probably we some programming required, but I was told that The ECU was pre-programmed for the NG engine, so it's probably only fine-tuning you will need to worry about.

Best regards

Karsten

bbruno
07-25-2011, 09:22 AM
Thanks for the documentation, I'll read it carefuly.

Is this product still under warranty ?

Did you by it on internet or in a shop?

Can the provider, provide also assistance in case of question for programmation.

Bruno

JoeDalton
07-25-2011, 03:09 PM
No, the kit is not under any kind of warranty i am afraid. But everything works and I'm quite sure engine parts are pretty durable. E.g the ECU is made to work under very harsh conditions.

I bought the kit here online: Audi R5 10V EFI Kit Saugmotor LMM (http://www.flow-improver.de/shopdeutsch/042c8b9b7f0931d0b/042c8b9b7f10de91d/042c8b99980d185f1/042c8b9aa70bf6507.php)

I pretty sure the provider can help you with the programming or any other documentation. The guy you want to talk to is Thorsten Müller, he's the lead engineer there and is fluent in english.

bbruno
07-27-2011, 10:36 AM
Hi Karsten,

After the first fast reading I have some questions.

In the documentation that you provide all is for 4 cylinder motor. 'and I don't see any possiblity to connect a 5'th one ! (same problem in the software snap shot)

Do you have somthing specific for the 5 cyl?

What is the brand of the injector's, type, caracteristics, ....

In case of low impedance are the resistor in the kit , ...

Best regards
Bruno

JoeDalton
07-27-2011, 12:20 PM
Hi Bhruno

1.These links to the adaptronic forum should answer your 5 cyl. question 5 cyl. 10 valve? (http://adaptronic.com.au/forum/index.php?topic=548.0) and Audi 5cyl 20vt and adaptronic 1280 (http://adaptronic.com.au/forum/index.php?topic=1252.0)

2. The injectors are Bosch low impedance injectors. I will try and find the serialnumber so I can post som more specific information.

Best regards

Karsten

bbruno
07-27-2011, 01:36 PM
Karsten,

I read alot of forum about this but nothing really relevant.

All what you provide me, I found exactly the same on internet.

I would like to have the doc of your kit, do you have pictures of all your material, do you have the doc of this specific kit for 5cyl ?

regards

Bruno

JoeDalton
08-01-2011, 12:12 PM
Hi Bruno

I never got the chance to really get into the documentation and installing so i don't know how to make the ECU work with 5 cylinders. If you have an e-mail i can send you all the material flow-improver sent me back in the day. :-)

Send me a PM with your e-mail.

Best regards

Karsten