License plate light inop [Archive] - Audi Forums

: License plate light inop


thunderstrike
06-07-2011, 06:31 PM
I replaced light bulbs but they're not coming on. Ohm meter shows they're not getting a power.

Can't seemed to figure out if it's the fuse as all other lights are functioning.

TT Racer X
06-07-2011, 10:44 PM
Since the rest of the driving lights work I believe the fuse is fine. I am assuming that you have a multi meter and you had it set to DC voltage when you tested for volts at the socket. I would follow the the positive wire back into the loom and see if there is a break some where.

ECS Tuning-Audi
06-09-2011, 12:54 PM
Sometimes those types of bulbs are polarity sensitive -try flipping them around. If that doesn't fix it you may need new license plate bulb assemblies

Jason

thunderstrike
06-14-2011, 04:50 PM
Fuse #4 is the one for the license plate lights.

sunexim
08-25-2011, 07:26 AM
It is not a problem of fuse. Have you contacted an expert yet for this problem, i think they can better help.

thunderstrike
08-25-2011, 07:40 AM
New #4 fuse fixed it. Thanks.