abs light audi 100

homer75 · 11-05-2006, 11:28 AM

My 1994 Audi 100E 2 litre petrol has started to show the abs warning light after about 5 or 10 mins driving. Sometimes it stays off for much longer. If I turn off the ignition and restart the car the light comes on and then go off as normal as the system does its self test. 5 / 10 mins later the abs light comes on. Could this be a sensor problem ? - I would assume that if it was a fault in the abs system then the light would come on permanently. Any help would be greatly appreciated.

Laseron2 · 11-05-2006, 12:54 PM

I also would think about a sensor of some sort. Possibly one of the the wheel sensors?

eurojoe · 12-11-2006, 12:08 AM

the abs unit go bad. get it scan when abs light on if there is on comm. with unit . remove inner fender well, washer bottle and 4 torx screws holding the abs unit to pump also unplug wires .get it fixed try bba

11-05-2006, 11:28 AM	#1 (permalink)
homer75 Newbie Join Date: Nov 2006 Location: Glasgow, Scotland Posts: 12 Gallery: (0)	abs light audi 100 My 1994 Audi 100E 2 litre petrol has started to show the abs warning light after about 5 or 10 mins driving. Sometimes it stays off for much longer. If I turn off the ignition and restart the car the light comes on and then go off as normal as the system does its self test. 5 / 10 mins later the abs light comes on. Could this be a sensor problem ? - I would assume that if it was a fault in the abs system then the light would come on permanently. Any help would be greatly appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Audi Forum Advertisement

11-05-2006, 12:54 PM	#2 (permalink)
Laseron2 Full Member Join Date: Jun 2006 Location: Ohio Posts: 137 Gallery: (0)	I also would think about a sensor of some sort. Possibly one of the the wheel sensors?

12-11-2006, 12:08 AM	#3 (permalink)
eurojoe Newbie Join Date: Dec 2006 Posts: 4 Gallery: (0)	the abs unit go bad. get it scan when abs light on if there is on comm. with unit . remove inner fender well, washer bottle and 4 torx screws holding the abs unit to pump also unplug wires .get it fixed try bba

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)