##B6 Front Headlight & Tail light Guide! ##

[sextro]

Rick, just wanted to tell you how great your guide was. Thanks a lot.

For everyone else, one addition to the guide is that the Torx driver needed to change the headlight is a T-30. Otherwise follow the guide and you'll have it changed and put back together in 10-15 minutes. On my A4 I didn't even have to disconnect any of the wiring harnesses; there was plenty of clearance to change the high or low beam.

Ryan

[radiofc]

Thanks for the excellent guide - I'd hate to have had to ask a mechanic to do something as trivial as change a light bulb

[Matt Bacon]

GENIUS! Thank you so much.

Originally Posted by RickT

Right.... as so many of you have been asking "how do i change the headlight bulbs and rear tails lights... i thought i would throw a quick guide together..

Also... the guide for the tail lights is for the avant... however from that im sure you will figure out how to do the saloon... (just open the lugs covered in carpet instead of the plastic opens..

Open and save/print the PDF to help you!

Enjoy!

Cheers

Rickt


IF YOU DONT HAVE ADOBE READER YOU CAN DOWNLOAD IT FROM HERE
Adobe - Reader download thank you

[bandstuff11]

Thanks a lot for posting this up. Nice guide.

[audiguyjames]

Rick:

Easiest instructions I could ever ask for. Took mw only 15 minutes to do. Thanks for looking out!!!!

[badger15]

Hey I also wanted to say thanks for the guide. Unfortuneately I am stuck at a very trivial point. I have all the screws done and the intake removed but can't seem to unplug the harness on either side?!?! I have tried pinching the clip on the side in with a screw driver and pulling and I can't get anything loose. It looks like it should be really easy? I haven't had any troube unplugging headlights in the past. Someone help please! : )

[badger15]

Figured it out. Had to pull up on the tabs on the harness. Have pics of my 8000K HID kit if anyone wants to see.