New Halo Lights!

**mandoh** · 02-05-2006, 11:34 PM

hey everyone wats your opinion on these lights i just bought?

http://motors.search.ebay.com/98-audi-a4-h...ssPageNameZWD6S

it's the 10th one down

Randomjim · 02-06-2006, 07:20 AM

Very nice. Will need slight modification to fit on pre 99 models though. Different shape front wings i think.

**mandoh** · 02-06-2006, 01:27 PM

well this guy has a 99% feedback, and it says fits exactly to the stock headlights, hopefully it does but i could always figure it out!!! but yea thanx for your statement!!!

Randomjim · 02-06-2006, 02:41 PM

They might be different to the ones i looked at. But i was told they had to be two piece. Good luck.

**AllWheelGrip** · 02-06-2006, 05:52 PM

i dont like em but thats my opinion

**mandoh** · 02-06-2006, 07:17 PM

yea i think u'r right. i mean it makes since b/c the stock ones are 2pc.
but who knows!!! as soon as i get them and put them on i'll let all of u no!!!!

Randomjim · 02-07-2006, 01:35 PM

I just read some i sell at work. It says requires modification to non visable body parts. So i guess its something under the hood.

**mandoh** · 02-07-2006, 05:56 PM

i'm just hoping i don't have to cut or trim a part of the actual body, b/c thats time,and cost consuming and it deff. wouldn't be worth it, i also talked to some ppl and they said it should mount rite in and u use the old mounts from u'r oem lights and it should work fine.

volcanoblack · 02-07-2006, 08:03 PM

Here's a good place to read about lights.

http://www.lltek.com/light_reserve.htm

The important section for your car is:

The 90% Perfect Alternative

A popular upgrade for the older 1996-1999 A4 was to retrofit a one piece Valeo headlamp, since the headlamp opening was nearly identical pre and post facelift. This retrofit required two adjustments. First the Bosch plug had to be cut off and replaced with a Valeo compatible plug. Second, some minor metal cutting of the inner fender was needed. The fit results are 90% perfect. LLTek has sold, and continues to sell, many headlamps for this type of upgrade and it is a nice upgrade. However, many enthusiasts do not like the idea of cutting their car, tinkering with plugs and less than a perfect fit.

=======
So there you have it. Cutting and buggering around required. Read on further down the page for their two piece upgrades.

VB

**mandoh** · 02-07-2006, 10:10 PM

thnax for the site, so i am basicly goin to have to do some mods. oh well sh** happens, u just learn from u'r mistakes. but those lights on there r expensive, almost 200 ea. i'm paying 164 i rather do the cutting to tell u the truth!!! but anyways

02-05-2006, 11:34 PM	#1 (permalink)
mandoh Moderator Join Date: Jun 2005 Location: New Jersey Posts: 503 Gallery: (0)	hey everyone wats your opinion on these lights i just bought? http://motors.search.ebay.com/98-audi-a4-h...ssPageNameZWD6S it's the 10th one down __________________ Its Better To Lead Than To Follow!!!! 1998 Audi A4 2.8l 30valve=SOLD mods-2.75in. milltek cat/bac exhaust,power adder short-ram intake,Giac ecu flash(awetunning),5%tint rear half,blacked out halo headlights 2007 WR Blue Subaru Wrx Sti mods- 3in.catless T/B exhaust,(invidia g200 cat-bac,v2catless D/P),COBB AP tune on 93oct,18x8.5 gunmetal work emotion cr's,blacked out headlights

02-06-2006, 07:20 AM	#2 (permalink)
Randomjim Expert Join Date: Sep 2005 Posts: 470 Gallery: (0)	Very nice. Will need slight modification to fit on pre 99 models though. Different shape front wings i think. __________________ I ate a big red candle!

02-06-2006, 01:27 PM	#3 (permalink)
mandoh Moderator Join Date: Jun 2005 Location: New Jersey Posts: 503 Gallery: (0)	well this guy has a 99% feedback, and it says fits exactly to the stock headlights, hopefully it does but i could always figure it out!!! but yea thanx for your statement!!! __________________ Its Better To Lead Than To Follow!!!! 1998 Audi A4 2.8l 30valve=SOLD mods-2.75in. milltek cat/bac exhaust,power adder short-ram intake,Giac ecu flash(awetunning),5%tint rear half,blacked out halo headlights 2007 WR Blue Subaru Wrx Sti mods- 3in.catless T/B exhaust,(invidia g200 cat-bac,v2catless D/P),COBB AP tune on 93oct,18x8.5 gunmetal work emotion cr's,blacked out headlights

02-06-2006, 02:41 PM	#4 (permalink)
Randomjim Expert Join Date: Sep 2005 Posts: 470 Gallery: (0)	They might be different to the ones i looked at. But i was told they had to be two piece. Good luck. __________________ I ate a big red candle!

02-06-2006, 05:52 PM	#5 (permalink)
AllWheelGrip Super Moderator Join Date: Jun 2005 Posts: 1,725 Gallery: (0)	i dont like em but thats my opinion __________________ There are many paths to the top of the mountain but the view will always be the same

Remove Advertisements Sponsored Links
Audi Forum Advertisement

02-06-2006, 07:17 PM	#6 (permalink)
mandoh Moderator Join Date: Jun 2005 Location: New Jersey Posts: 503 Gallery: (0)	yea i think u'r right. i mean it makes since b/c the stock ones are 2pc. but who knows!!! as soon as i get them and put them on i'll let all of u no!!!! __________________ Its Better To Lead Than To Follow!!!! 1998 Audi A4 2.8l 30valve=SOLD mods-2.75in. milltek cat/bac exhaust,power adder short-ram intake,Giac ecu flash(awetunning),5%tint rear half,blacked out halo headlights 2007 WR Blue Subaru Wrx Sti mods- 3in.catless T/B exhaust,(invidia g200 cat-bac,v2catless D/P),COBB AP tune on 93oct,18x8.5 gunmetal work emotion cr's,blacked out headlights

02-07-2006, 01:35 PM	#7 (permalink)
Randomjim Expert Join Date: Sep 2005 Posts: 470 Gallery: (0)	I just read some i sell at work. It says requires modification to non visable body parts. So i guess its something under the hood. __________________ I ate a big red candle!

02-07-2006, 05:56 PM	#8 (permalink)
mandoh Moderator Join Date: Jun 2005 Location: New Jersey Posts: 503 Gallery: (0)	i'm just hoping i don't have to cut or trim a part of the actual body, b/c thats time,and cost consuming and it deff. wouldn't be worth it, i also talked to some ppl and they said it should mount rite in and u use the old mounts from u'r oem lights and it should work fine. __________________ Its Better To Lead Than To Follow!!!! 1998 Audi A4 2.8l 30valve=SOLD mods-2.75in. milltek cat/bac exhaust,power adder short-ram intake,Giac ecu flash(awetunning),5%tint rear half,blacked out halo headlights 2007 WR Blue Subaru Wrx Sti mods- 3in.catless T/B exhaust,(invidia g200 cat-bac,v2catless D/P),COBB AP tune on 93oct,18x8.5 gunmetal work emotion cr's,blacked out headlights

02-07-2006, 08:03 PM	#9 (permalink)
volcanoblack Senior Join Date: Oct 2005 Location: Oregon, USA Posts: 195 Gallery: (0)	Here's a good place to read about lights. http://www.lltek.com/light_reserve.htm The important section for your car is: The 90% Perfect Alternative A popular upgrade for the older 1996-1999 A4 was to retrofit a one piece Valeo headlamp, since the headlamp opening was nearly identical pre and post facelift. This retrofit required two adjustments. First the Bosch plug had to be cut off and replaced with a Valeo compatible plug. Second, some minor metal cutting of the inner fender was needed. The fit results are 90% perfect. LLTek has sold, and continues to sell, many headlamps for this type of upgrade and it is a nice upgrade. However, many enthusiasts do not like the idea of cutting their car, tinkering with plugs and less than a perfect fit. ======= So there you have it. Cutting and buggering around required. Read on further down the page for their two piece upgrades. VB

02-07-2006, 10:10 PM	#10 (permalink)
mandoh Moderator Join Date: Jun 2005 Location: New Jersey Posts: 503 Gallery: (0)	thnax for the site, so i am basicly goin to have to do some mods. oh well sh** happens, u just learn from u'r mistakes. but those lights on there r expensive, almost 200 ea. i'm paying 164 i rather do the cutting to tell u the truth!!! but anyways __________________ Its Better To Lead Than To Follow!!!! 1998 Audi A4 2.8l 30valve=SOLD mods-2.75in. milltek cat/bac exhaust,power adder short-ram intake,Giac ecu flash(awetunning),5%tint rear half,blacked out halo headlights 2007 WR Blue Subaru Wrx Sti mods- 3in.catless T/B exhaust,(invidia g200 cat-bac,v2catless D/P),COBB AP tune on 93oct,18x8.5 gunmetal work emotion cr's,blacked out headlights

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode