Parking Sensors - Paint Chipping

[bungle]

Has any one else had any signs of the paint chipping off the front Parking sensors.

I have flaking paint coming off the middle two sensors. I had put one down to a stone chip until the second one started as well.

cDSC00091.JPG cDSC00092.JPG

I think ill be back in to the Garage!

She has already been back in for a new Near side wing mirror that wouldn't "park" itself and suck half way up.

Any one had any problems with paint matching on this sort of thing?

Bungle

[BigladUK]

Originally Posted by bungle

Has any one else had any signs of the paint chipping off the front Parking sensors.

I have flaking paint coming off the middle two sensors. I had put one down to a stone chip until the second one started as well.

Attachment 4807 Attachment 4806

I think ill be back in to the Garage!

She has already been back in for a new Near side wing mirror that wouldn't "park" itself and suck half way up.

Any one had any problems with paint matching on this sort of thing?

Bungle

Sorry to here of your troubles.

We haven't had any problems except for the ash tray in the rear passenger door which I lent on and broke.

Touch wood all is fine.

You seen this post .... Shows the AMI screen and the newer 3D view maps

AudiWorld Forums: Q7

Si

[bungle]

Thanks Si,

I found the 3D View last week by chance, is it not standard? I took delivery in November.

One thing i was annoyed about was the lack of SAP Bluetooth profile in my Coms pack, as it was in all the literature, but only installed for later November onward models. Would have been useful but hay.

Regards

Richard

[BigladUK]

Originally Posted by bungle

Thanks Si,

I found the 3D View last week by chance, is it not standard? I took delivery in November.

One thing i was annoyed about was the lack of SAP Bluetooth profile in my Coms pack, as it was in all the literature, but only installed for later November onward models. Would have been useful but hay.

Regards

Richard

Mine has a build date of 12/06 and I don't think mine has SAP Bluetooth profiles but we both use PDA phones so I guess would never know.

Can you post instructions on how you turned on 3D View ?

I'll check my books tonight to see if I can get SAP working
Si

[jon harris]

Yes i have replaced two full sets under paint defect warranty.Speak to the dealer warranty clerk and he/she will process you complaint.Ask for new sensors which shouldnt be a problem allow 4 hours for repair.

[bungle]

Originally Posted by jon harris

Yes i have replaced two full sets under paint defect warranty.Speak to the dealer warranty clerk and he/she will process you complaint.Ask for new sensors which shouldnt be a problem allow 4 hours for repair.

Thanks Jon,

She is booked in for Monday 2/4/07 morning to sort out all the little issues, hope it wont be an issue.

Regards

Richard