back window washer

DanA3 · 03-13-2008, 12:52 PM

Any one had problems wit back window washer? Not had chance to look at mine yet. can hear the motor running but thats it. Any one took there tail gate inside panel off? if so how easy ?

Thanks
Dan

markiestarby · 03-26-2008, 02:00 PM

I got same problem! i quirt and nothing comes out! but it runs down through the back wheel arch, so i think its a split in the pipe. lift up boot, undo the 2 screws and just pull hard at the plastic trim, it all clips off. :-)

**T-sport** · 03-26-2008, 02:31 PM

A similar thing happpened to my A3 as well and it turned out to be the pipe that clips on to the washer jet had come off and this in turn ended up with the boot lid filling with water after a period of time..

I just pulled on the plastic backing trim and unclipped as markiestartby says and all became clear straight away.. Just cut a few mm off the pipe and re attached alls good now !!

Sonic.1964 · 05-08-2008, 04:58 PM

Quote:

Originally Posted by DanA3

Any one had problems wit back window washer? Not had chance to look at mine yet. can hear the motor running but thats it. Any one took there tail gate inside panel off? if so how easy ?

Thanks
Dan

GIVE ME A PHONE ON 07773662680 AND I,LL EXPLAIN EXACTLY WHAT YOUR PROBLEM IS. CHEERS NICKY

03-13-2008, 12:52 PM	#1 (permalink)
DanA3 Newbie Join Date: Jul 2007 Posts: 21 Gallery: (0)	back window washer Any one had problems wit back window washer? Not had chance to look at mine yet. can hear the motor running but thats it. Any one took there tail gate inside panel off? if so how easy ? Thanks Dan __________________

03-26-2008, 02:31 PM	#3 (permalink)
T-sport Super Moderator Join Date: Sep 2005 Location: Devon,uk Posts: 1,382 Gallery: (0)	A similar thing happpened to my A3 as well and it turned out to be the pipe that clips on to the washer jet had come off and this in turn ended up with the boot lid filling with water after a period of time.. I just pulled on the plastic backing trim and unclipped as markiestartby says and all became clear straight away.. Just cut a few mm off the pipe and re attached alls good now !! __________________ 2002 1.8 T Avant 18" TT Quattro Replicas Forge Motorsport DV

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Audi Forum Advertisement

03-26-2008, 02:00 PM	#2 (permalink)
markiestarby Newbie Join Date: Oct 2007 Posts: 1 Gallery: (0)	I got same problem! i quirt and nothing comes out! but it runs down through the back wheel arch, so i think its a split in the pipe. lift up boot, undo the 2 screws and just pull hard at the plastic trim, it all clips off. :-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)