Brake Light Up

jho · 08-02-2005, 08:49 PM

My 1991 200 Turbo "BRAKE" light in the instrument cluster lights up few days ago. The hydraulic fluid is between mini and maxi in the reservoir. I stroke the brake pedal at least 40 times with engine off and it is still firm, so I guess the pressure accumulator is still OK. What else could cause the "BRAKE" light to come off? Thanks, pal.

Jung

jho · 08-29-2005, 11:50 PM

:57: I found the problem. It was caused by the brake pressure switch located at the barke servo. Replace it and the Brake light is off.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-02-2005, 08:49 PM	#1 (permalink)
jho Newbie Join Date: Aug 2005 Posts: 3 Gallery: (0)	My 1991 200 Turbo "BRAKE" light in the instrument cluster lights up few days ago. The hydraulic fluid is between mini and maxi in the reservoir. I stroke the brake pedal at least 40 times with engine off and it is still firm, so I guess the pressure accumulator is still OK. What else could cause the "BRAKE" light to come off? Thanks, pal. Jung

Remove Advertisements Sponsored Links
Audi Forum Advertisement

08-29-2005, 11:50 PM	#2 (permalink)
jho Newbie Join Date: Aug 2005 Posts: 3 Gallery: (0)	:57: I found the problem. It was caused by the brake pressure switch located at the barke servo. Replace it and the Brake light is off.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)