Audi Forum - View Single Post

veneto rs2 · 05-31-2008, 06:21 AM

Hi everyone

You probably are not aware that ADU cambelt must be positioned out of the set mark on the cam pulley....

Don't tell me i'm crazy...

This is due to a different waterpump pulley compared to the ABY motor instead of setting a new/dedicated mark on the cam pulley Audi went for a "out of mark" set....

The issue it's well known on the RS2 fans world here you can see the "correct" setting:

Off set has to be just and only on the cam pulley the rest has to be put onmark!

Stefano

05-31-2008, 06:21 AM	#2 (permalink)
veneto rs2 Newbie Join Date: Feb 2008 Posts: 2 Gallery: (0)	Hi everyone You probably are not aware that ADU cambelt must be positioned out of the set mark on the cam pulley.... Don't tell me i'm crazy... This is due to a different waterpump pulley compared to the ABY motor instead of setting a new/dedicated mark on the cam pulley Audi went for a "out of mark" set.... The issue it's well known on the RS2 fans world here you can see the "correct" setting: Off set has to be just and only on the cam pulley the rest has to be put onmark! Stefano Last edited by veneto rs2 : 05-31-2008 at 06:24 AM.