To fit a facelift bumper to the pre facelift car, you need the wing mounts for the later car,the screw straight on to the wings no problem. Also to fit the fogs one of the horns needs to be moved, i mounted mine higher up,and its still there now even tho i have an S4 bumper.I Just dropped the wires for the fogs down to the bumper mounted ones job done,I do not recall ther being 3. use a meter and check which one is positive and make your own earth if you want to be sure.
The connectors are similar to others around the car, but i was lucky and got the correct ones for mine form the donor car. you could use small spades and then fill the hole with hot glue to make it water proof?
__________________
1.8t conversion : Ko4-15 : Vmaxx Coils : 6 Speed 'Box : SPEC Stage 3 Clutch : S4 Heated Leather : Facelift Console and Shiney paint
|