Audi Forum - View Single Post - Fitting S6 LED daytime running lights to A6 S-Line

fo2203 · 10-10-2007, 08:33 AM

of course i have.

1 Audi S6 Stand- und Tagfahrleuchten

2 Audi S6 LED Standleuchte Tagfahrleuchte TFL S8 S4 S3 S bei eBay: Designleuchten Lichter (endet 12.10.07 12:02:26 MESZ)

i think that the best way is to connect the LED's to foglight's wires. way? because you ca manage the light as you want. if you use the original S6 "steuergerat", your lights will work at same as in the original S6 combination. but the most important ( and you must think about it) is that you MUST change your original bumper, with the original S6 bumper, because the LED's can be mounted just in this. of course, will not be 100% like beafore ( aprox 1mm difference in bought sides), but for me was not a tragedy. another thing that you must do, (when you decide to change the bumper), is that you must cut about 5 cm from the front alu trager in bought sides as you see ( http://www.motor-talk.de/bbs/Attachm...4564&ajax=true) the blue circle.
anyway, you CAN NOT control the LED from MMI, the only lights that you can control from there, are daylights as you know. in S6, the LED's are connected with the headlights and when that are on , the LED is off. the lights on S6 are different, with the foglights up, in the headlights.

best regards, f

10-10-2007, 08:33 AM	#8 (permalink)
fo2203 Newbie Join Date: Oct 2007 Posts: 10 Gallery: (0)	Led of course i have. 1 Audi S6 Stand- und Tagfahrleuchten 2 Audi S6 LED Standleuchte Tagfahrleuchte TFL S8 S4 S3 S bei eBay: Designleuchten Lichter (endet 12.10.07 12:02:26 MESZ) i think that the best way is to connect the LED's to foglight's wires. way? because you ca manage the light as you want. if you use the original S6 "steuergerat", your lights will work at same as in the original S6 combination. but the most important ( and you must think about it) is that you MUST change your original bumper, with the original S6 bumper, because the LED's can be mounted just in this. of course, will not be 100% like beafore ( aprox 1mm difference in bought sides), but for me was not a tragedy. another thing that you must do, (when you decide to change the bumper), is that you must cut about 5 cm from the front alu trager in bought sides as you see ( http://www.motor-talk.de/bbs/Attachm...4564&ajax=true) the blue circle. anyway, you CAN NOT control the LED from MMI, the only lights that you can control from there, are daylights as you know. in S6, the LED's are connected with the headlights and when that are on , the LED is off. the lights on S6 are different, with the foglights up, in the headlights. best regards, f Last edited by fo2203 : 10-10-2007 at 12:29 PM.