Unplug connector.Turn brake light switch anti-clockwise through 45° and remove.
Installing
Install in reverse order, paying attention to the following:
Pull out plunger of brake light switch as far as it will go -arrow-.
Insert retainer tabs -1- and -2- of switch in recesses provided in assembly opening and secure by turning clockwise through 45°.
Notes:When installing, brake pedal is not to be pressed.
Plunger is adjusted automatically on inserting brake switch.
Check operation of brake lights both with brake pedal pressed and at rest.You may require a second switch if you havent fitted it correctly
Last edited by a8 tech : 07-09-2007 at 01:09 PM.
|