Audi Forum - View Single Post

edan41 · 03-25-2007, 07:21 PM

What ever you do, do not remove the radio there is not need to. Take a butter knife and slide it in between the wood grain plastic piece and the rubber molding. The wood grain piece will slowly come out of the six clips. This will expose the hazard button and assembly. The hazard swich has a steped base, just pry it from the top and then the bottom until it pops out. There are two spring clips one on each side of the hazard button. Unclip the electrical plug and replace it with the new hazard switch. Took me less than 10 minutes.

03-25-2007, 07:21 PM	#8 (permalink)
edan41 Newbie Join Date: Mar 2007 Posts: 1 Gallery: (0)	A6 turn signal relay What ever you do, do not remove the radio there is not need to. Take a butter knife and slide it in between the wood grain plastic piece and the rubber molding. The wood grain piece will slowly come out of the six clips. This will expose the hazard button and assembly. The hazard swich has a steped base, just pry it from the top and then the bottom until it pops out. There are two spring clips one on each side of the hazard button. Unclip the electrical plug and replace it with the new hazard switch. Took me less than 10 minutes.