Ok need a little help. I got the tranny back in my car and everything back together. I had to replace the clutch master cylinder, so the whole clutch line in dry. I can't get any fluid to flow. I put a vacuum pump on the bleeder on the slave and pumped and pumped, no fluid. I pulled the hose off the master and it is still dry, so I put the pump on that hose and pumped but still no fluid.
What do I try now?
I also need to know what to use for hydraulic fluid, the level is at the min line so I know going to need more, don't know if that is the problem either.
|